.png){kind=spacer}
Excellent sur Trustpilot
%20(1).png){kind=small}
Plus grande boutique de golf sur mesure en Europe
.png){kind=icon}
Livraison gratuite pour les commandes de plus de 250€
0
Via Hosel Adapter:
Loft, Lie, Face Angle
Via Movable Weight Track: (When possible)
Ball Flight (Neutral, Draw, Fade)
Adjustments are made with the Torque Wrench. Use the wrench to loosen the screw in the center of each weight, then slide the weight to the desired location and lock it in place by tightening the screw until you hear an audible “click” noise from the wrench. In order to adjust the Loft Sleeve, loosen the screw in the heel until the clubhead releases from the shaft. Align the desired loft as marked on the sleeve with the line on the back of the hosel and tighten the screw until you hear an audible “click” noise.
Following adjustments are accurate to all Taylormade drivers sold on customclubs website.
Adjust Hosel Adapter
There are 12 different modes for the adapter, which you can see on the picture beside. For each position, the Loft changes 0.5 °–0.75 °, Lie 0.5 °–0.75 ° and Face Angle 1.0 °–2.0 °.
STANDARD - No adjustment.
LOWER - Lower Ball flight and less spin and 4° Open Face Angle (Fade, anti-draw)
UPRIGHT - More upright lie
HIGHER - Higher Ball flight and more spin and 4° Closed Face Angle (Draw, anti-fade)
